Pubblicazioni

PUBBLICAZIONI TECNICO SCIENTIFICHE

1.Antonella Tarzia, Jeanette Montanaro, Alfonso Maffezzoli, Angelo Nacci, Michele Casiello, Cosimo Annese - “Synthesis, curing and properties of an epoxy resin derived from gallic acid” - BioResources, Vol. 18, N. 01, pp. 632,645.

2. Cardone D., Angiuli R., Gesualdi G. “Application of Shape Memory Alloys in Historical Constructions” International Journal of Architectural Heritage, (2018) DOI: 10.1080/15583058.2018.1563225

3.Cardone D., Angiuli R., Gesualdi G. “Development, testing and implementation of a SMA-based device prototype for historical constructions” Proceeding of International Conference on Structural Analysis of Historical Constructions 2018 Cusco – Perù

4.Attanasio. V.Tarantino et al. - Alkali-Activated Mortars for Sustainable Building Solutions: Effect of Binder Composition on Technical Performance – Environments J.

5. S. Sgarioto et al. - ReSiELP: Recovery of Silicon and other Materials from End-Of-Life Photovoltaic Panels – SUM 2018 Symp. Proceedings

6. Attanasio, A. Largo - Cement-free mortars based on aggregates from construction and demolition waste – MMS 2018 Conf. Proceeding


PUBBLICAZIONI A CARATTERE DIVULGATIVO

1. Michele Rizzo, Antonio Gerardi, “Modellazione multi-scala di compositi termoplastici da riciclo”, Compositi Magazine, Numero 49, Settembre 2018.

2. Leonardo Cosma, Antonio Gerardi (CETMA), Domenico Scardigno (ALAS Meccanica), “Virtual Manufacturing”, L’industria Meccanica, Numero 718, Novembre-Dicembre 2018.

3. Andrea Tinti – “Processo di riciclo meccanico per scarti industriali di schiume poliuretaniche rigide e validazione del materiale da riciclo” - Poliuretano n. 61 Dicembre 2018 pp. 3-8.

4. Attanasio, A. Largo - Alkali-Activated Binders combined with Construction and Demolition Wastes: valuable resources for green building materials – Book of Abstracts MMS 2018

5. Attanasio, A. Largo - Alkali Activated Mortars using various Construction and Demolition Wastes – Book of Abstracts III European Geopolymer Network

6. V. Tarantino, I. Ingrosso, A. Largo - Compositi bio-based per il rinforzo sostenibile di strutture in legno – Compositi Magazine - Giugno 2018

7. R. Angiuli, A. Ramirez, V. Tarantino, A. Largo - Metodologie di controllo real–time per lavorazioni meccaniche non convenzionali - Pubblicazione " Ricerca, sviluppo e formazione in Puglia: i progetti del Distretto Tecnologico Aerospaziale. Dalla visione strategica ai risultati."

8. Ingrosso, A. Largo - Sensori a fibre ottiche per il monitoraggio real-time di materiali compositi – Compositi Magazine - Dicembre 2018

PUBBLICAZIONI TECNICO SCIENTIFICHE

Per quanto riguarda la produzione tecnico-scientifica, si elencano le seguenti pubblicazioni:
1. “Resin Pressure Evolution During Autoclave Curing of Epoxy Matrix Composites” - Francesca Lionetto, Giuseppe Buccoliero, Silvio Pappadà, Alfonso Maffezzoli - POLYMER ENGINEERING AND SCIENCE—2017;

2. “Finite element modeling of continuous induction welding of thermoplastic matrix composites” – Francesca Lionetto, Silvio Pappadà, Giuseppe Buccoliero, Alfonso Maffezzoli - Materials and Design 120 (2017) 212–221;

3. “Numerical modeling and experimental characterization of fused silica-based ceramics during investment casting processes” - Pasquale Bene, Michele Rizzo, Leonardo Cosma (CETMA), Michele Di Foggia (EMA) – Paper – CERMODEL2017 – Trento – Italy – 26/28 Luglio 2017; (verificare)

4. “Development of a Serious Game to Enhance Assistive Rehabilitation” - Andrea Martini, Francesco Argese,Piero Cirillo, Italo Spada, Mauro Bellone - Int. J. of Medical Engineering and Informatics, Vol. 1, No., 2018 –

5. “Landscape analysis in Torre Guaceto area (Brindisi) aimed to the reconstruction of the Late Holocene sea level curve” - Mastronuzzi G, Milella M., Piscitelli A., Simone O., Quarta G, Scarano T., Calcagnile L.,Spada I. - Int .J. Geoambiental Global, Vol. 45, No. 2017/2018;

6. “Splendida Torre Guceto, Riserva in realtà aumentata” - Scarano T., Spada I. - Riv. Naz. Archeologia Viva, n. 184, anno 2017

7. “Building the castle of Sammichele di Bari - A tangible user interface game for learning about local heritage” - Ferdinando Cesaria, Anna Marina Cucinelli, Giuseppe De Prezzo, Italo Spada – SPRINGER INTERNATIONAL, Book, Digital Culturale Heritage.

8. “Towards Greener Concrete: the Challenges of SUS-CON Project” - (FIB Symposium 2017 Proceedings /High Tech Concrete: Where Technology and Engineering Meet | Springer) - Autori A. Attanasio, A. Largo, et al.

9. “Valorization of industrial wastes: SUS-CON building solutions” - (AMAM-ICAM 2017 Proceedings) ProScience (ISSN 2283-5954) - Autori A. Attanasio & A. Largo

10. “Valorization of construction and demolition wastes: RE4 building solutions” - (AMAM-ICAM 2017 Proceedings) ProScience (ISSN 2283-5954) - Autori A. Attanasio & A. Largo.

11. “Costruire senza cemento: l'esperienza CETMA” (Atti delle Giornate di studio sui Geopolimeri - IX edizione 2017) - Autori A. Attanasio, A. Largo & L. Pascali;

12. “Reduction of environmental impact of industrial and mining activities: viable solutions for eco-sustainable buildings” (Scientific Reasearch Abstract | AMAM-ICAM 2017) - Autori A. Largo & A. Attanasio.


PUBBLICAZIONI A CARATTERE DIVULGATIVO

1. “Development of innovative out of autoclave technologies for aerospace” – Giuseppe Buccoliero, Umberto Raganato, Michele Arganese, Luca Lanzilotto, Andrea Salomi, Michele Rizzo, Silvio Pappadà (CETMA) - Paper – Compositi Magazine (Settembre 2017);

2. “Study and development of a carbon fiber heatsink for LED road lamps” – Andrea Tinti, Michele Rizzo, Riccardo Angiuli, Umberto Raganato, Giovanni Giodice, Ubaldo Spina (CETMA), Alessandro Deodati (NITEKO) - Paper – Compositi Magazine (Marzo 2017);

3. “Fibra di carbonio da riciclo per la cantieristica da diporto” - G. Buccoliero, S. Pappadà, M. Arganese, L. Lanzilotto, U. Raganato – COMPOSITI magazine anno XII– dicembre 2017;

4. “Hybrid welding of carbon-fibre reinforced epoxy based composites” - Lionetto, F.; Maffezzoli, A.; Pappadà, S.; Buccoliero, G.; Morillas, M.N.; Fernandez Villegas, I. - ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials;

5. “Application of Smart FRP Devices for the Structural Health Monitoring of Heritage Buildings - A Case Study: The Monastery of Sant’Angelo d’Ocre” - Key Engineering Materials ISSN: 1662-9795, Vol. 747, pp 448-455 doi: 10.4028/www.scientific.net/KEM.747.448 - Angela Coricciati, Ilaria Ingrosso, Antonio Paolo Sergi and Alessandro Largo;

6. “Studio e sviluppo di un dissipatore termico in fibra di carbonio per lampade LED stradali” - Compositi Magazine Anno XII - numero 45 - Settembre 2017 - ISSN 2499-6890 - Tinti, Rizzo, Raganato, Giodice, Spina, Deodati.

PUBBLICAZIONI TECNICO SCIENTIFICHE

1. A. Coricciati, “Design, Manufacturing and Experimental Validation of Optical Fiber Sensors Based Devices for Structural Health Monitoring”, Sensors & Transducers, giugno 2016;

2. A. Greco, F. Ferrari, A. Maffezzoli, P. Delogu, R. Velardi, A.Timo, A.Tarzia, A. Marseglia, M. Calò , “Active Polymer Nanocomposites: Application in Thermoplastic Polymers and in Polymer Foams”, Environmental Engineering and Management Journal, settembre 2016;

3. A. Attanasio, A. Largo, R. Vinai, M. Soutsos, M. Preda, F. Sonzogni, O. Kaya, “Sustainable solutions for the construction sector: integration of secondary raw materials in the production cycle of concrete”, ITALIAN CONCRETE DAYS Giornate aicap 2016 Congresso CTE, ottobre 2016;

4. R. Vinai, M. Soutsos, A. Largo, A. Attanasio, I. Larraza, V. Chozas “DEVELOPMENT OF SUSTAINABLE, INNOVATIVE AND ENERGY-EFFICIENT CONCRETE, BASED ON THE INTEGRATION OF ALL-WASTE MATERIALS: SUS-CON PANELS FOR BUILDING APPLICATIONS”, The 9th International Concrete Conference 2016, luglio 2016;

5. R. Dotoli, A. Cassinelli (CETMA), D. Bardaro (D’Appolonia SpA), A. Caruso (Leonardo Helicopters), “A numerical procedure for the prediction of draping process combining Matlab, Ls-Dyna and Hyperworks” – Paper - International CAE Conference 2016 – Parma – Italy – 17/18 ottobre 2016;

6. A. Gerardi, M. Rizzo, “Advanced technologies for bomb-proof cargo containers and blast containment units” – Poster Award - International CAE Conference 2016 – Parma – Italy – 17/18 ottobre 2016;

7. A. Mellone (UniSalento), M. Spagnolo, V. Primavera (EnginSoft), A. Cassinelli (CETMA), “Thermo-Structural Analysis of curing process and demoulding operation using ANSYS Composite Cure Simulation” – Poster Award - International CAE Conference 2016 – Parma – Italy – 17/18 ottobre 2016;

8. F. Argese, A. Martini, R. Dotoli, F. Chionna, V. Palmieri, “Real-time collaboration tools for CAD/CAE analysis review: a case study” – Poster Award - International CAE Conference 2016 – Parma – Italy – 17/18 ottobre 2016;

9. C. Maruccio (Unisalento), P. Bene, A. Gerardi (CETMA), D. Bardaro (D’Appolonia), “Integration of CAD, CAE and CAM procedures for Ceramic Components undergoing sintering”, Journal of the European Ceramic Society, Vol. 36, Issue 9, 9 August 2016, Pages 2263–2275;

10. F. Felline, C. Rosato, M. Scatto, A. Tinti, P. Scopece e M. Nacucchi, “Active Polymer Nanocomposites: Application in Thermoplastic Polymers and in Polymer Foams”, IEEE Transactions on Nanotechnology 15 (2016) 896-903;

11. F. Chionna, F. Argese, V. Palmieri, I. Spada, L. Colizzi – “Integrating building information modeling and augmented reality to improve investigation of historical buildings” – Conservation science in cultural heritage – 13/2013 MIMESIS ISBN 978-88-5753-547-0;

12. F. Argese, A. Martini, R. Dotoli, F. Chionna, V. Palmieri, “Real-time collaboration tools for CAD/CAE analysis review: a case study” – International CAE Conference 2016 (Parma, Italia);

13. F. Argese, A. Martini, F. Chionna, V. Palmieri, L. Rizzi – “A cost-effective haptic glove with vibro-tactile and temperature feedback for Virtual Reality applications” - Multimedia Tools and Application International Journal 2016;

14. M. Bellone, A. Martini, F. Argese, I. Spada, P. Cirillo, A. Cerasa, “Development of a Serious Game to Enhance Assistive Rehabilitation” - IEEE - Transaction on Neural Systems and Rehabilitation Engineering 2017

15. F. Cesaria, F. Argese, G. De Prezzo, C. Pino,·I. Spada, “An integrated system for semi-automatic guided tour based on holographic 2D projections and beacon technology” - Multimedia Tools and Application International Journal 2017, Springer;

16. F. Cesaria, F. Argese, I. Spada, G. DE PREZZO, C. PINO, “Olografia e sistemi di comunicazione avanzati per I sotterranei del Castello di Otranto”, Archeomatica 2017


PUBBLICAZIONI A CARATTERE DIVULGATIVO

1. “Greening concrete with sustainable raw materials” – Research*eu Results Magazine N. 49, febbraio 2016;

2. AccelerHealth 2016 - Mentoring per Startup del settore medicale;

3. È nuovo, è semplificato, è colorato, è italiano. È flauto facile, FALAUT, novembre 2016

4. Questione di Sana Accelerazione, Il Giornale dell’Architettura, novembre 2016;

5. Borse a LED e trolley seduta, il design progettato al Sud, Il Quotidiano, dicembre 2016;

6. Da Casa nasce Casa (Il Quotidiano, INTERNI-MAGAZINE, Domusweb).

1. Luigia Longo, Antonella Tarzia, Alessandra Passaro – “Nuove potenzialità per le fibre di carbonio da riciclo” 4° Convegno Nazionale Assocompositi, 6 e 7 maggio 2015


2. S. Pappadà, A. Salomi, J. Montanaro et al., “Fabrication of a thermoplastic matrix stiffened panel by induction welding”, aerospace Science and Technology, Vol. 43, June 2015, Pages 314-320.


3. S. Pappadà, a. Salomi et al, “Eco-Fairs: Development of Thermoplastic Structural Fairing for Helicopters”, Aerodays 2015, 20-22 October 2015 London.


4. Alessandro Largo, Agnese Attanasio, Sonia Saracino, Valle Chozas, Inigo Larraza, Francesco Sonzogni, Marco Preda, Lucian Balaceanu and Longin Balaceanu, “Lightweight sustainable and energy – efficient concrete with all – waste aggregates”, Proceedings of the VII International Congress on Architectural Envelops - ICAE 2015 - 27-28 May 2015 - San Sebastian-Donostia (Spain) - ISBN 978-84-88734-10-5


5. Jeanette Visser, Agnieska Bigaj, Alessandro Largo, “Editorial to Special Issue on Sustainable concrete”, Heron Journal


6. Agnese Attanasio, Alessandro Largo , Iñigo Larraza Alvarez, Francesco Sonzogni, Lucian Balaceanu, “Sustainable aggregates from secondary materials for innovative lightweight concrete products”, Heron Journal


7. Jeanette Visser, Alessandro Largo, Agnese Attanasio et alii, “Sustainable concrete: design and testing”, Heron Journal


8. Dora Coelho, Joana Branquinho, Paulo Ramos, Agnese Attanasio, Alessandro Largo, “Surface treatments of recycled aggregates for the preparation of an all-waste based concrete”, Green chemistry and Nanotechnologies in Polymer Chemistry 2015


9. Joana Branquinho, Dora Coelho, Paulo Ramos, Agnese Attanasio, Alessandro Largo, “Surface treatments of recycled aggregates for the preparation of an all-waste based concrete”, European Coating Cogress 2015


10. Wanda Arena, Agnese Attanasio, Alessandro Marseglia, Sandro Pascale, Elisabetta Ristoratore, Beniamino Rocco, Sonia Saracino, Giorgio Urbano, “Geoclustering - Market availability & mapping of waste streams across the EU-27”, Libro


11. A. Gerardi, “Ottimizzazione dei processi di Liquid Moulding per il settore della nautica mediante l’ausilio di analisi numeriche complesse” - Seminario Assocompositi c/o COMPOTEC2015 – Carrara – Italy – 04/06 Febbraio 2015;


12. R. Dotoli, M. Rizzo “Fabric impact drop tests: numerical simulations using the Ls-Dyna micro-mechanical approach and experimental characterization”- ADEPRON (portali di Ingegneria e Tecnologia Aerospaziale, Ingegneria dei Materiali e Nanotecnologie e Ingegneria e Sicurezza Strutturale).


13. F. Argese, A. Martini, L. Colizzi, M. Fina, G. Reo, F. Ambrosino, P. Bene, L. Cosma, (2015). “A Virtual Prototyping Platform to Improve CAE Analysis Workflow”. In Augmented and Virtual Reality (pp. 267-286). Springer International Publishing.


14. C. Maruccio (Unisalento), P. Bene (CETMA), “Integration of CAD, CAE and CAM procedures for Ceramic Components undergoing sintering” - CERMODEL2015 – Trento – Italy – 01-03/07/2015


15. Argese, F., Martini, A., Colizzi, L., Fina, M., Reo, G., Ambrosino, F., ... & Cosma, L. (2015). A Virtual Prototyping Platform to Improve CAE Analysis Workflow. In Augmented and Virtual Reality (pp. 267-286). Springer International Publishing.


16. Chionna, F., Cirillo, P., Palmieri, V., & Bellone, M. (2015). A Proposed Hardware-Software Architecture for Virtual Reality in Industrial Applications. In Augmented and Virtual Reality (pp. 287-300). Springer International Publishing.


17. F. Chionna“A Web-Based Infrastructure for MRI-based computer classification of neurological patients: NEURO-IMAGE”, Neurological Sciences - Official Journal of the Italian Neurological Society,Voulme 36,Ottobre 2015, Springer


18. A. Martini, L. Colizzi, F. Chionna, F. Argese, M. Bellone, P. Cirillo and V. Palmieri (2015, March) - "A Novel 3D User Interface for the Immersive Design Review" IEEE Symposium on 3D User Interfaces (23 - 24 March 2015), Arles, France ISBN: 978-1-4673-6886-5/15


19. F. Cesaria, titolo “An Augmented Reality mobile application for enhancing paleontological tourism experience”, Conferenza Internazionale Stereo & Immersive Media 2015


20. CAU-VAM - 2015 – N. Savino et alii – “A Web-Based Infrastructure for MRI-based computer classification of neurological patients: NEURO-IMAGE" - presentato al XLVI Congress of the Italian Neurological Society e pubblicato su Neurological Sciences - Official Journal of the Italian Neurological Society, Voulme 36, Ottobre 2015, Springer


21. CAU-SIK - 2015 – Nicola Savino , V. Molendini, R. Rascazzo et alii – “A Decision Support System for Fostering Smart Energy Efficient Districts” - 21st Americas Conference on Information Systems (Manuscript ID AMCIS-0451-2015.R1), Puerto Rico from August 13-15, 2015


22. CAU-SIK - 2015 – N. Savino, P. Siciliano, M. De Tommaso – “Care@Home: Methodology, Goals and Project Experimentation Activities” – Ambient Assited Living, Italian Forum 2014, 2015, Springer, ISBN: 978-3-319-18373-2 Pages 307-316


23. Green Business Innovation – “Developing Innovative Entrepreneurship Through Green Economy Applications and Human Resource Training On Green Jobs in the Cross-border Area” – Consulting Activities

1. Íñigo Larraza, Ignacio del Val, Alessandro Marseglia, Giovanni Giodice, Jose Vera-Agullo, “GREEN CAST DEMONSTRATION OF INNOVATIVE LIGHTWEIGHT CONSTRUCTION COMPONENTS MADE OF RECYCLED ASH FOR SUSTAINABLE BUILDINGS”, International Journal of Research in Engineering and Technology, 2014;


2. L. Rizzi, U. Spina , C. Dinardo, V. Dimiccoli, “Medical Device for Patient Immobilization and Repositioning During Proton Therapy Treatment”, 5th International Conference on Applied Human Factors and Ergomomics (AHFE 2014), 19-23 July 2014, Krakow, Poland


3. Invitto S., Spada I., Turco D., De Tommaso M., Belmonte G. “Virtual reality and Planktonic elements: Cognitive preference and 3D perceptions in Marine Biology Students” – Congress of Italian Society of Psychophysiology, 27-29 November 2014; Neuropsychological Trends LED Editions


4. Invitto S., Spada I., Turco D., Belmonte G. (2014) “Easy Perception Lab: Evolution, Brain and Virtual and Augmented Reality in Museum Environment Lecture Notes in Computer Science”, Vol 8853


5. Invitto S., Spada I., Turco D., Belmonte G. “Easy Perception Lab: Evolution, Brain and Virtual and Augmented Reality in Museum Environment” Conference: SALENTO AVR – International Conference on Virtual and Augmented reality, At Lecce, September 2014


6. Invitto S. Sammarco S., Durante N., Turco D., Spada I. Belmonte G. Museum Ergonomy And Evolution: 2D, 3D and multidimensional Perception. DOI: 10.1111/psyp.12280 Conference: SPR 54th Annual Meeting Society of Psychophysiological Research, At Atlanta, Volume: Psychophysiology Vol.51 S1 – September 2014


7. Invitto S., Spada I., Turco D., Belmonte G., “Easy Perception Lab: Perceptive Ergonomy through Virtual and Augmented Reality in MAUS” Museum DOI: 10.1145/1163405.1163407. Conference: International Conference on Education and Modern Educational Technologies (EMET’14), Santorini


8. Conference Proceeding AHFE 2014 (ISBN: 978-1-4951-1572-1), il nostro articolo “Medical Device for Patient Immobilization and Repositioning During Proton Therapy Treatment - L. Rizzi, U. Spina , C. Dinardo, V. Dimiccoli” si trova a pagina 1847.


9. R. Dotoli, M. Rizzo “Fabric impact drop tests: numerical simulations using the Ls-Dyna micro-mechanical approach and experimental characterization”- International CAE Conference 2014 – Lazise (Verona) – Italy, 27-28 October 2014;


10. 2014 – Nicola Savino et alii – “Fostering smart cities through ict: expected outcomes and impacts of DAREED concept” - t-Gov Workshop ’14 (t-Gov 14) June 12 – 13 2014, Brunel University, West London, UB8 3PH


11. Smartourism And Knowledge Era (ISBN:978-88-6458-064-7) – POÎESIS Collana di studi e ricerche sull’eGovernment, Tangram Edizioni Scientifiche Trento : ”Open Innovation in Public Administrations: the experience of the MHiA Living Lab project” – M.Pezzuto, M.Pendinelli, T.Perrone, P.Rametta, L.Verardi ( pag. 115)- Ottobre 2014


12. Poster “MHiA: Open Innovation in Public Administrations” - M.Pezzuto, M.Pendinelli, T.Perrone, P.Rametta, L.Verardi presentato a INISTA 2014 - “International Symposium on INnovations in Intelligent SysTems and Applications”, Alberobello (BA) 24 giugno 2014 CETMA: Rapporto Annuale 2014 13


13. Lignola G.P., Angiuli R., Prota A., Aiello M.A., “Confinement of masonry: Analytical Modeling” Springer Netherlands - Materials and Structures June 2014 DOI 10.1617/s11527-014-0323-6 Online ISSN 1871- 6873.


14. Micelli F., Angiuli R., Corvaglia P., Aiello M.A., “Passive and SMA-activated confinement of circular masonry columns with basalt and glass fibers composites” Composites Part B: Engineering Volume 67, December 2014, Pages 348–362


15. Tinti A., Tarzia A., Passaro A., Angiuli R. “Thermographic analysis of polyurethane foams integrated with phase change materials designed for dynamic thermal insulation in refrigerated transport” Applied Thermal Engineering Volume 70, Issue 1, 5 September 2014, Pages 201–210


16. Angiuli R., Corvaglia P., Largo A., Coricciati A. “Defect identification and acceptance of FRP and FRCM masonry reinforcement by IRT survey” - Key Engineering Materials 09/2014; 624:80-87. DOI: 10.4028.


17. Micelli F., Aiello M.A., Di Ludovico M., Prota A., Manfredi G., Angiuli R. “Experimental tests on full scale FRP/FRCM confined masonry columns subjected to axial load” Proceeding of International Conference Structural Faults & Repair 2014 - 9th – 10th July 2014 Edinburgh, Scotland ISBN No: 0-947664-75-10.


18. Assembleia A., J. Branquinho J. Largo A. Attanasio A., Ramos P., Coelho D., Couto S., “Sustainable concrete: Influence of mixture composition on thermal, mechanical and acoustic performance”, Proceedings of CINCO14 Porto 13-14 November 2014


19. Largo A., Failla C., Preda M., Sonzogni F.: “Sustainable concrete: integrazione dei rifiuti nel ciclo di produzione di un calcestruzzo sostenibile, innovativo e ad alta efficienza energetica”, 20th CTE congress, 6-8th november 2014, Milan, Italy.


20. Panagiotopoulo C., Taxiarchou M., Chozas V., Soutsos M., Vinai R., Corvaglia P., Largo A.: “SUS-CON: Sustainable, innovative and energy-efficient concrete”, Proceedings of Industrial Technologies 2014, Athens 9-11 April 2014


21. M. Leone, M. A. Aiello, R. Rametta, U. Raganato, “The Mechanical Behavior of a Pin-Loaded Hole in a Thermoplastic Composite Laminate”, Mechanics of Composite Materials March 2014, Volume 50, Issue 1, pp 51-64. DOI: 10.1007/s11029-014-9392-4


22. F.Felline, R.Gennaro, S.Pappadà, A.Passaro, M.Arganese, Composite panels with bio-based resins, Composite Magazine anno IX,n.ro 31 March 2014.


23. R.Gennaro, M.Christmann, A.Greco, G.Rieber, P.Mitschang, A.Maffezzoli, Experimental measurement of transversal micro and macro permeability during compression molding of PP/glass composites, Composite Polymer Jan 2014, 35(1),105-108.


24. S. Pappadà, A. Salomi, Jeanette Montanaro, Alessandra Passaro, A. aruso, A. Maffezzoli “Full scale tests on thermoplastic components for aerospace sector” SEICO 14, 10-11 March 2014 “Paris”.


25. S. Pappadà, A. Salomi “Clean-Sky Eco-Fairs Project: Components for helicopter in thermoplastic composite” Advanced Materials International Forum, 18-19 Settembre 2014 Bari (Italy).


26. Silvio Pappadà, Andrea Salomi, Jeanette Montanaro, Alessandra Passaro, Alfonso Maffezzoli, New induction welding equipment for the aerospace sector, No87 March 2014 / jec composites magazine. CETMA: Rapporto Annuale 2014 14


27. Silvio Pappadà, Andrea Salomi, Riccardo Gennaro, Alessandra Passaro, Gaetano Micelli, Alternative all’autoclave, No32 Giugno 2014/composite magazine


28. Francesca Lionetto, Francesco Montagna, Riccardo dell’Anna, Silvio Pappadà, Alfonso Maffezzoli, “Ultrasonic consolidation of commingled tehrmoplastic composites rovings”, SETEC Tampere 10-09-2014.


29. A. Salomi, S. Pappadà, “Tecnologie out of autoclave per il settore trasporti” COMPOTEC 2014, 6 Febbraio 2014, Marina di Carrara (Italy).

1. Gerardi, D. Bardaro –“Computational fluid-dynamic analysis to support the development


2. of innovative architectures for the heat recovery in the field of the glass industry”- International CAE Conference 2013- 21 – 22 ottobre 2013, Pacengo del Garda, Verona.


3. P. Bene, D. Bardaro – “Numerical-experimental method to study the viscous behaviour of ceramic materials”- CERMODEL 2013 Modelling and Simulation meet innovation in ceramic technology - 10-12 luglio 2013, Trento.


4. P. Corvaglia, A. Largo, M. Soutsos – “Sustainable, innovative and energy-efficient concrete, based on the integration of all-waste materials: the SUS-CON PROJECT”- Proceeding of the Conference “Sustainable built environment for now and the future”, Hanoi (Vietnam), 26-27 marzo 2013.


5. R. Angiuli, P. Corvaglia, A. Largo, D. Cardone – "Design and development of SMA-Based device for the protection of Masonry arches and vaults: investigation on the use of different types of SMAs” - Proceedings of the International Conference on Shape Memory and Superelastic Technologies, 20-24 maggio 2013 Praga, Repubblica Ceca, pp. 378-379.


6. Coricciati, P. Corvaglia, A. Largo, M. A. Caponero – “Smart Composite device for structural health monitoring”, Advances in Science and Technology, Vol. 83 (2013), pp 138-143.


7. Largo e R. Angiuli – “Thermographic investigation of “LECCESE” stone masonry structures”, Nondestructive Testing of Materials and Structures RILEM Bookseries, Volume 6, 2013, pp 1137-1142.


8. POSTER. L. Rizzi, U. Spina, I. Spada, N. Savino – “Virtual validation of adaptive lighting to improve safety indoor mobility”, AAL-Forum 2013 Norrköping, 24-26 settembre 2013.


9. R. Gennaro, A. Marseglia, A. Passaro, G. Poliseno, N. D’Alessio, M. Somma – “RECYCLED PLASTIC FROM AHP - Absorbent Hygiene Products”, Proceeding dell‘ISWA congress 2013 “Recycled plastic from AHP”, 7-11 ottobre 2013.


10. R. Gennaro, A. Marseglia, A. Passaro, G. Poliseno, N. D’Alessio, M. Somma, – “Recycled plastic from AHP” su Environmental Engineering and Management Journal November 2013, Vol.12, No. S11, Supplement, 27-30


11. S. Pappadà, R. Gennaro, A. Passaro, F. Felline – Proceeding “Resin Transfer Moulding of composite panels with bio-based resins”, SEICO 2013.


12. F. Felline, S. Pappadà, R. Gennaro e A. Passaro – “Resin Transfer Moulding of Composite Panels with Bio-Based Resins”, SAMPE Journal, Volume 49, No. 3, maggio/giugno 2013. Centro di progettazione, design & tecnologie dei materiali 13


13. R. Gennaro, A. Greco, A. Timo, F. Bonfantini, A. Maffezzoli – “A comparative study between bio-composites obtained with opuntia ficus indica cladodes and flax fiber”. Journal of Polymers and the Environment, (2013) 21:910–916 DOI 10.1007/s10924-013- 0595-x.


14. R. Gennaro, A. Marseglia, A. Passaro,G. Poliseno, N. D’Alessio, M. Somma – “Plastica Riciclata da Prodotti Assorbenti per la Persona”, Ecomondo 2013, 6-9 novembre, Rimini.


15. R. Gennaro, “Resin Transfer Moulding (RTM) and RTM light: CETMA Experience” – Compotec: 5TH International Exhibition Composites and Related Technologies, CarraraItaly.

1. V. Bevilacqua, D. Buongiorno, D. Chiaradia, N. Longo and N. Savino, “ A Genetic Optimization Technique for the Strategic Use of Renewable Energy Supply“, 20 febbraio 2012, WIVACE (Workshop Italiano di Vita Artificiale e Computazione Evolutiva), Parma.


2. P. Corvaglia, D. Cardone, M. Arturo Caponero, G. Maddaluno, “Innovative devices for structural control and monitoring of civil infrastructures”, SMART STRUCTURES, Proceedings of the 5th European Conference on Structural Control – EACS 2012, Genova 18-20 June 2012, paper n. 165


3. D. Cardone, G. Gesualdi, S. Sofia, D. Nigro, P. Corvaglia, R. Angiuli, O. Manni, “Development and experimental evaluation of a device based on shape memory alloys for the seismic rehabilitation of historical buildings”, SMART STRUCTURES, Proceedings of the 5th European Conference on Structural Control – EACS 2012, Genova 18-20 June 2012, paper n. 84.


4. M.A. Aiello, F. Micelli, R. Angiuli, P. Corvaglia, “Masonry circular columns confined with glass and basalt fibers”, a. Proceedings of the 6th International Conference on FRP Composites in Civil Engineering - CICE 2012, Rome 13-15 June 2012, paper n. 91 – CD Rom.


5. A. Coricciati, P. Corvaglia, A. Largo and M. A. Caponero, “Smart composite device for structural health monitoring”, Proceedings of CIMTEC2012 (4th International Conference on Smart Materials, Structures, Systems) - Montecatini Terme, Italy ; 11-14 June 2012.


6. P. Corvaglia, A. Largo, M. Soutsos, “Sustainable, innovative and Energy-efficient concrete, based on the integration of all-waste materials: The SUS-CON Project“, Proceedings of the FIB Symposium “Concrete Structures for Sustainable Community”, Stockholm, 11-14 June 2012, pp. 499-502, ISBN 978-91-980098-1-1, Publisher Swedish Concrete Association. Centro di progettazione, design & tecnologie dei materiali 11


7. C. Dinardo, L. Rizzi, “The UCD of the Touch Screen Graphical Interface on the Domestic Unit of a In-Home Telemonitoring System”, Advances in Human Aspects of Healthcare, luglio 2012.


8. U. Spina, “Un nuovo concept di lettino prelievo”, Compositi magazine, settembre 2012.


9. M. De Tommaso, K. Ricci, L. Laneve, N. Savino, V. Antonaci, P. Livrea, “Virtual Visual Effect of Hospital Waiting Room on Pain Modulation in Healthy Subjects and Patients with Chronic Migraine”, Hindawi Publishing Corporation, Pain Research and Treatment, Volume 2013, Article ID 515730, Anno 2012.


10. A. Coricciati, P. Corvaglia, A. Largo, M. A. Caponero, “Smart composite device for structural health monitoring”, Advances in Science and Technology, Vol. 83 (2013) pp 138-143.


11. R. Gennaro, S. Pappadà, A. Caruso, G. Massaccesi, “Simulazioni numeriche di un component aereonautico complesso”, Compositi magazine N. 25, Settembre 2012.


12. A. Caruso, R. Gennaro, Gi. Massaccesi, S. Pappadà, “La simulazione nei processi RTM”, Progettare N. 365 Settembre 2012.


13. A. Salomi, A. Greco, A. Maffezzoli, R. Rametta, T. Pacifico, “Processing and Properties of a Polymer/Composite Double-Layer Laminate”, Advances in Polymer technology, published on line DOI 10.1002/adv, In press.


14. E. Calò, C. Massaro, R. Terzi, A. Cancellara, E. Pesce, M. Rea, A. Greco, A. Maffezzoli, P. I. Gonzalez-Chi, A. Salomi, “Rotational molding of polyamide“-6 nanocomposites with improved flame retardancy. Int. Polym. Process. 2012, 27, 370–377.


15. A. Marseglia, I. Larraza Álvarez, “GREEN CAST” - Demonstration of innovative lightweight construction components made of recycled fly ash for sustainable buildings”